top of page
Background Fogging.jpg

Fogging Services

Fogging and Cleaning Services

Allpest Equipment Services carry out chemical fogging treatments throughout the UK, this is done using various equipment that we supply. The main application objective is disinfection which covers a variety of area's including poultry houses, greenhouses, grain stores and food mills being popular with this type of treatment.

Thermal fogging offers an even droplet coverage the same as applying with the cold fogging technique but with the distinct advantage of a much faster treatment time. Fly control in waste management facilities is another area becoming more popular using either thermal fogging for inside buildings and mist blowers for outside as a cost effective option to complex integrated systems.

For any advise on area's requiring treatment please contact us 

Subcontracting Services Available Nationwide

Contracting Services Thumbnail Header 2.
Fogging Image with Blur.jpg
SN50 In Use.jpg

Typical Areas of Application -

  • Grain Stores

  • Poultry House Fogging 

  • Greenhouse Fogging

  • Polytunnels 

  • Warehouses

  • Waste Management Fly Control

Allpest Equipment Services are located in the midlands and are able to offer nationwide fogging services.

Either contract or one off treatments are undertaken.

Applying Water / Oil Based Products

Oil and water based products can be applied with a special high performance fog mixing tube fitted for water based chemicals to ensure all the product is mixed and airborne rather than a percentage dropping straight to the ground.


This high performance fog mixing tube is very effective and allows increased dosage rates in excess of 60lts an hour with the larger machines. As can be seen in the photos, using the oil based fog tube to apply water based results in excessive waste especially when applying large dosage rates. With the High Performance Fog Tube a dry product film is visible indicating all the product is applied without any waste.

high performance fogging tube flow rate

Health and Safety

Company Health and Safety regulations can prevent the use of thermal fogging equipment being used due to the fuel needed to power these machines but Allpest Equipment services can provide an alternative solution, this being the Cold Fogging method which can be applied by electric ULV equipment in the building or engine driven machines with spray heads mounted in the building at either ground level or at roof height and connected via a flexi hose to the motor unit positioned externally. Large area's are treatable with the same results as thermal fogging.

Please contact us for more information on this alternative fogging method.

bottom of page